13 Gauge Gloves
13-gauge gloves are a versatile choice for industries that demand both dexterity and moderate protection. Made from lightweight materials like nylon, polyester, or HPPE, these gloves provide a snug fit that contours to the hand, allowing for precise movements. Their coatings—such as polyurethane for enhanced grip, nitrile for resistance to oils, or latex for durability—adapt them to a variety of tasks, from assembly lines to automotive work. Known for their breathability and comfort, 13-gauge gloves reduce hand fatigue during prolonged wear, making them ideal for precision-driven environments like electronics and small-parts handling. Their ergonomic design provides a close fit, enabling natural movement while reducing strain during repetitive tasks, while options for cut-resistant versions enhance safety in environments where handling sharp objects is common.
<<< Show Less- Cut Level 4
- Abrasion Level 6
PORTWEST Hi Vis Cut Resistant Glove - ANSI Cut Level A4 - A625
ANSI cut level A4 High-visibility liner Tested for both cut and heat protection PU foam coating for excellent grip in wet and dry conditions Palm ...
PORTWEST Anti Static ESD Gloves - ANSI Cut Level A1 - A198
Diverts static electricity For use in electronics assembly, testing and precision work Smooth Polyurethane coating for increased abrasion resistan...
PORTWEST® Arc Flash & Flame Resistant Cut Glove - A780
High level of protection against ARC flash burns, cuts and flames 13-gauge, flame-resistant aramid liner, increases dexterity and hand movement F...
Pyramex® Tear And Abrasion Resistant Nitrile Smooth Safety Cut Gloves - GL614
ANSI/ISEA 105-2016 – CUT A1 | PUNCTURE 2 | ABRASION 6 EN388:2016 – 4121X Type: Dipped Glove Material: Nitrile Smooth Liner: 13 Gauge Polyester Cuf...
Pyramex® Tear and Puncture Resistant Safety Cut Gloves - GL401
ANSI/ISEA 105 CUT A1 | ABRASION 3 | PUNCTURE 2 EN388 ABRASION 4 | CUT 1 | TEAR 3 | PUNCTURE 1 | CUT-TDM 100 X Polyurethane coating on the palm...
Pyramex® Tear Resistant Nitrile Dipped ANSI Cut Level A4 Safety Gloves - GL603C5
ANSI/ISEA 105 CUT A4 | ABRASION 4 | PUNCTURE 4 EN388 ABRASION 4 | CUT X | TEAR 4 | PUNCTURE 3 | CUT TDM-100 D Micro-foam nitrile coating on p...
Pyramex® Tear Resistant - Touchscreen ANSI Cut Level A6 Safety Cut Gloves - GL610C
ANSI/ISEA 105-2016 CUT A6 | ABRASION 6 | PUNCTURE 4 ANSI/ISEA 138-2019 IMPACT 2 EN388 4X43EP Type: Dipped Glove Material: Sandy Nitrile Liner:...
Pyramex® Cut Resistant ANSI Cut Level A3 Touch Sensitivity Safety Gloves - GL405C
ANSI/ISEA 105-2016 CUT A3 | PUNCTURE 4 | ABRASION 4 EN388 4X42C EN388 4X42C Type: Dipped Glove Material: Polyurethane Liner: 13 Gauge Nylon...
PORTWEST Thermal Cut Resistant Impact Gloves - ANSI Impact Level 2 - A729
ANSI cut level A4 for supreme protection Maximum impact protection using TPR pod technology Nitrile foam coating for excellent grip in wet and dry...
PORTWEST Aqua Cut Resistant Pro Gloves - ANSI Cut Level A6 - AP50
Seamless 13 gauge liner. Protects against cuts and abrasion. Prevents grease, oil and water penetration. Sandy finish for exceptional grip in wate...
Pyramex® Insulated Latex Dipped Cut Resistant ANSI Cut Level A4 Safety Gloves - GL507C
ANSI/ISEA 105 - CUT A4 | ABRASION 5 | PUNCTURE 4 EN388: ABRASION 3 | CUT X | TEAR 4 | PUNCTURE 3 | CUT TDM-100 D EN511 - CONTACT COLD 2 Type: Ins...
Pyramex® Hi-Vis Abrasion and Cut Resistant ANSI Cut Level A4 Safety Glasses - GL404C
ANSI/ISEA 105-2016 CUT A4 | PUNCTURE 4 | ABRASION 4 EN388 4X42D Type: Dipped Glove Material: Polyurethane Liner: 13 Gauge HPPE Cuff: HPPE + Lat...
Pyramex® Hi-Vis Insulated Cut Resistant ANSI Cut Level 2 Safety Gloves - GL505
ANSI/ISEA 105 – CUT A2 | ABRASION 4 | PUNCTURE 2 EN388 - ABRASION 3 | CUT 2 | TEAR 3 | CUT TDM-100X EN511 - CONTACT COLD 2 Type: Insulated Dip...
Pyramex® Sandy Nitrile Dipped Cut Resistant ANSI Cut Level A6 Safety Gloves - GL609C
ANSI/ISEA 105-2016 CUT A6 | ABRASION 6 | PUNCTURE 4 ANSI/ISEA 138-2019 IMPACT 2 EN388 4X43EP Type: Dipped Glove Material: Nitrile Sandy Liner: 1...
Pyramex® Hi-Vis Nitrile Coated ANSI Cut Level A4 Safety Gloves - GL607C
ANSI/ISEA 105 CUT A4 | ABRASION 5 | PUNCTURE 4 EN388 ABRASION 4 | CUT X | TEAR 4 | PUNCTURE 3 | CUT TDM-100 D Micro-foam nitrile coating on pal...
PORTWEST Dexti Ultra Cut Resistant Gloves - CAT 2 - ANSI Cut Level A3 - AP52
ANSI cut level A3 for superior protection Sandy finish for exceptional grip in water, grease or oil Reinforced thumb crotch for extra protection a...
Pyramex® Micro-Foam Nitrile Dotted ANSI Cut Level A4 Safety Gloves - GL603DPC5
ANSI/ISEA 105-2016 CUT A4 | ABRASION 4 | PUNCTURE 4 EN388 4X43D Type: Dipped Glove Material: Micro-Foam Nitrile Dots: Nitrile Smooth Liner: 13...
MCR Safety NXG PU Coated Palm & Finger Gloves - 13 Gauge Nylon Shell - Gray - 9666
13 Gauge Gray Nylon Shell Gray PU Coated Palm and Fingertips Individually poly bagged by the pair Color coded hem to identify sizes ANSI Ratings:...
Cordova Safety Ogre Impact Activity Gloves - 13-Gauge ANSI Cut Level A2 - 7735
OGRE® stands for Oil, Gas & Refining Equipment. The Cordova Safety Products OGRE® brand gloves are designed for those down and dirty jobs that ...
Cordova Safety Ogre CR+ Cut Resistant Gloves - 13-Gauge ANSI Cut Level A5 - 7739V
OGRE-CR+ 13-GAUGE, HI-VIS YELLOW HPPE/GLASS/STEEL SHELL, TPR PROTECTORS, RED SANDY NITRILE PALM COATING, ANSI CUT LEVEL A5, HOOK & LOOP WRIST ...
PORTWEST® Maximum Cut Resistant Grip Gloves - Sandy Nitrile Palm Coating - ANSI Cut Level A7 - A667
Optimized innovative design Over 5000 grams of cut resistance achieving ANSI Cut A7 Maximum cut resistance according to EN388:2016 The coating is ...
MCR Safety NXG Foam Nitrile Dipped Gloves - 13 Gauge Nylon Shell - Gray - 9673
13 Gauge Gray Nylon Shell Black Foam Nitrile Palm and Fingers Knit Wrist Cool and Comfortable Easy to wear ANSI Ratings: Puncture - 2 Abrasion -...
MCR Safety Cut Pro Gloves - 13 Gauge Hypermax Shell - PU Palm & Fingers - 92752
Sold As 12 Per Pack 13-gauge salt & pepper Hypermax™ shell PU coated palm and fingers offer increased grip and abrasion resistance Excellent c...
Cordova Safety Machinist Ice Cut Resistant Gloves - 13-Gauge ANSI Cut Level A5 - 3734ICE
The MACHINIST®-ICE cold-weather glove features a durable, 13-gauge, HPPE/synthetic fiber shell which offers an increased cut resistance over gloves...